JIM DUNLOP MXR M104 DISTORTION + GUITAR EFFECT PEDAL (M-104/M 104)

JIM DUNLOP MXR M104 DISTORTION + GUITAR EFFECT PEDAL (M-104/M 104)


Specifications
SPECIFICATION
* Input Impedance : 1 MΩ * Output Impedance : 25 kΩ * Nominal Input Level : -22 dBV * Maximum Output Level : -14 dBV * Noise Floor : -74 dBV * Distortion Gain: 10 dB to 45 dB, 1 kHz * Bypass : Hardwire * Current Draw: 2.5 mA * Power Supply: 9 volts DC
M-104
PEDAL, WITH ADAPTOR
Details

The Distortion+ delivers everything from cool overdriven blues tones to huge ’80s hard rock distortion. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

* Everything from cool overdriven blues tones to huge '80's hard rock distortion
* Overdrive with just the right flavor of non-brittle signal breakup
* Organic, germanium-powered clipping
* Goes from subtle overdrive to fuzz-like saturation
* DC 9V operation

DIRECTIONS

* Run a cable from your guitar to the Distortion+’s INPUT jack and run another cable from the Distortion+’s OUTPUT jack to your amplifier.
* Start with all controls at 12 o’clock.
* Turn the effect on by depressing the footswitch.
* Rotate OUTPUT knob clockwise to increase overall volume of effect or counterclockwise to decrease it.
* Rotate DISTORTION knob clockwise to increase amount of distortion or counterclockwise to decrease it


View more about JIM DUNLOP MXR M104 DISTORTION + GUITAR EFFECT PEDAL (M-104/M 104) on main site